HomeHome  PortalPortal  FAQFAQ  RegisterRegister  Log in  

Share
 

 i need somewhere that can....

Go down 
AuthorMessage
hodge112
VAG Whore
hodge112

Number of posts : 1346
Ride : mk1 golf, lupo 1.4s, mk2 golf driver
Registration date : 2009-02-03

i need somewhere that can.... Empty
PostSubject: i need somewhere that can....   i need somewhere that can.... EmptyFri Mar 26 2010, 23:03

put my spigot rings on a lathe

ive got metal spigot rings, both the outter and inner bores are wrong

the outter bores are 75mm
and the inner are 56.6mm

the outters need to be 65.1
and inners need to be 57.1

does anyone know where would do this for me?

assuming a lathe would be the best way?
cheers
Back to top Go down
Luke_MK1
VAG Wales Moderator
Luke_MK1

Number of posts : 2679
Ride : Mk2 GTI - Citroen C5
Registration date : 2009-04-11

i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... EmptyFri Mar 26 2010, 23:08

I really do suggest you ask the college nicely across the road, Does no one you know have a lathe, like Mark?
If that fails a local metalwork company should do this, for a small fee
Back to top Go down
http://www.oes-uk.com
dubmanted
VAG Resident
dubmanted

Number of posts : 338
Ride : mk1 Diesel
Registration date : 2009-02-22

i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... EmptyFri Mar 26 2010, 23:14

may be cheaper to get some made for the wheels below, i had a set made to spec off of ebay,hardend rubber i think they were for like 15quid

i need somewhere that can.... 26-09-06_1221
Back to top Go down
Scirocco_oldboy
Keyboard Warrior


Number of posts : 225
Ride : Scirocco
Registration date : 2009-12-09

i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... EmptyFri Mar 26 2010, 23:34

Ok I own a lathe and can use a lathe Very Happy
Not sure what you want (Age related thingy again Laughing ) If you want to put a complete wheel on a lathe then i can't help. My max is 6" yeah yeah iknow!
Back to top Go down
themimoth
Scene Mincer
themimoth

Number of posts : 682
Ride : Skoda Fabia vrs. TDI CITI Golf, Golf Mk1 Campain
Registration date : 2009-10-31

i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... EmptyFri Mar 26 2010, 23:56

il do it if your stuck, not got acess to a lathe for two weeks though
Back to top Go down
Cymro
VAG Wales Admin
Cymro

Number of posts : 2222
Ride : Mk2 Polo "Fern", Kia Sportage
Registration date : 2008-03-26

i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... EmptySat Mar 27 2010, 07:46

Sciroccoboy wrote:
Ok I own a lathe and can use a lathe Very Happy
Not sure what you want (Age related thingy again Laughing ) If you want to put a complete wheel on a lathe then i can't help. My max is 6" yeah yeah iknow!

He needs the inside of the spigot made bigger for VW fitment and the outside shaved down for the wheels.

_________________
"If my calculations are correct, when this baby hits eighty-eight miles per hour... you're gonna see some serious shit"

McLOVIN - RE: Polo Show 2011 - There was a ginger alert at the gate?? Man that place is well ahead of the times, next they'll be installing gas fittings into the shower heads in the gingers showers...

i need somewhere that can.... BannerOEM2-crop
Back to top Go down
Sponsored content




i need somewhere that can.... Empty
PostSubject: Re: i need somewhere that can....   i need somewhere that can.... Empty

Back to top Go down
 
i need somewhere that can....
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
VAG Wales :: VagWales Chat :: General Vag Chat-
Jump to: